型砂测试设备

型砂制样锤 - 型号 42100

型砂制样锤用于制备标准 AFS 2 英寸x 2 英寸（公制 50 mm x 50 mm）圆柱形砂试样，用于压缩、剪切、劈裂、变形和拉伸试验。

制样管填充附件 - 型号 42100A

制样管填充附件有助于将试样填充至制样管以测试其紧实率。

型砂制样锤锤座 - 型号 42100C

为了确保读数的一致性和准确性，型砂制样锤（型号：42100）需防振。

型砂制样锤基架 - 型号 42100D

使用型砂制样锤（型号：42100）时产生的振动除了会干扰同一工作台上的其他敏感仪器外，还会对测试结果的准确性产生负面影响。

Rowell 流动性测试仪 - 型号 42100E

Rowell 流动性测试仪通过测试型砂在模型上紧密压实成深腔的能力来确定型砂的流动性。

芯盒横向强度附件 - 型号 42100F

芯盒横向强度附件配合型砂制样锤（型号 42100）一起使用，以制备气硬性或芯油粘合剂粘合的标准横向砂试样。

芯盒抗拉强度附件 - 型号 42100G

芯盒抗拉强度附件配合型砂制样锤（型号 42100）一起使用，以制备气硬性或芯油粘合剂粘合的标准抗拉砂八字试块。

抗拉强度芯盒附件（9 腔） - 型号 42103

抗拉芯盒用于制作标准试样，用于使用自硬（气体固化）砂进行抗拉强度测试。

横向芯盒附件（9 腔） - 型号 42103A

横向芯盒附件用于制造标准试样，用于使用自硬（气体固化）砂进行横向强度测试。

电子型砂强度测试仪 - 型号 42104

电子式型砂强度测试仪可测量铸造粘土砂试样和化学粘结砂试样的强度性能。

冷拉强度附件 - 型号 42104C

此附件安装于电子型砂强度测试仪（型号42104）上。

劈裂强度附件 - 型号 42104D

要测定湿态或干态粘土结合型砂的劈裂强度，需将两个专门设计的圆形夹具连接到电子型砂强度测试仪（型号42104）上，这样可以间接测量型砂的抗拉强度特性。

湿变形附件 - 型号 42104E

此附件用于电子型砂强度测试仪（型号42104）上，通过抗压测试来测量潮模砂试样的变形情况。

热壳抗拉附件 - 型号 42104F

此附件是电子型砂强度测试仪（型号42104）的配套设备，用于测量壳型砂的热抗拉强度。

高压强度附件 - 型号 42104H

此附件与电子型砂强度测试仪（型号42104）配合使用，可将抗压测试的压力提升至最高2068N/cm²（3000 psi）的强度。

芯砂横向强度附件 - 型号 42104K

此附件连接至电子型砂强度测试仪（型号42104），用于夹持标准芯砂砂样进行横向强度测试。

壳型砂横向强度附件 - 型号 42104L

此附件连接至电子型砂强度测试仪（型号42104），用于破坏壳型砂/覆膜砂的横向强度试样。

冷壳砂抗拉强度附件 - 型号 42104N

冷壳砂抗拉强度附件安装于电子型砂强度测试仪（型号42104）上，用于测定壳型砂/覆膜砂和芯砂的抗拉强度。

圆盘横向附件 - 型号 42104P

此附件是电子型砂强度测试仪（型号42104）的配套设备，用于破坏圆盘横向试样，包括夹臂和称重传感器附件。

数显透气性仪 - 型号 42105

数显透气性仪是一套全自动化系统，可测量多孔砂体在压实和松散状态下的透气性。

Shell Permeability Accessory - Model 42105A

Measures the permeability of shell sand samples.

Mold Permeability Accessory - Model 42105B

Measures the permeability of an actual production mold or core.

Base Permeability Accessory - Model 42105C

Tests the base permeability of dry sands.

Additional Permeability Accessory - Model 42105D

This accessory to the Digital Absolute Permmeter tests the permeability of refractory coatings applied to cores and molds.

Laboratory Sifter - Model 42106

Used to determine the fineness of foundry sands.

Sand Testing Sieves - Model 42106A

Used with the Laboratory Sifter.

1/8" Microsplitter - Model 42106B

Used to prepare a representative sample of unbonded foundry sands for sieve analysis testing.

1/2" Riffle Splitter - Model 42106D

Used to prepare a representative sample of unbonded foundry sands for sieve analysis testing.

Methylene Blue Clay Tester - Model 42108

Used to determine the amount of live bentonite clay present in a sand sample.

Ultrasonic Cleaner - Model 42108B

Used with the Methylene Blue Clay Tester to scrub a sand sample before the addition of methylene blue dye.

Test Pieces Blower - Model 42109

Used to make standard tensile, transverse (except cold box) and hot distortion test pieces.

Catalyst Vaporizer - Model 42109A

Connects to the Test Piece Blower or the Modified Test Piece Blower in order to control the gassing and purging sequence of the test specimen via the included electronic cables and supply lines.

Cold Box Gassing Purging Device - Model 42109B

Attaches to the tooling of the Test Piece Blower and Modified Test Piece Blower in order to produce cold box (gas curred) test specimens.

Disk Transverse Accessory - Model 42109C

Attaches to the tooling of the Test Piece Blower, Model 42109, and Modified Test Piece Blower, Model 42109MOD, in order to produce cold box (gas curred) test specimens.

Laboratory Muller - Model 42110

Used to prepare mixtures of clay bonded foundry sands and other chemical processing applications that require the high intensity mulling action of the wheels.

Laboratory Core Sand Mixer - Model 42111

Designed to mix liquid binders with sand that is common to all chemically bonded sand mixtures.

Wet Tensile Tester - Model 42112

Determines tensile strength of the condensation zone that is created in all clay bonded molds during and after pouring.

Hot Distortion Tester - Model 42114

Measures the expansion and high temperature plastic performance of chemically bonded sands when suddenly heated by liquid metal.

High Temperature Compression Tester - Model 42115

Used to determine hot properties of molded sand with any type of binder (kaolinites, bentonites and chemical binders).

Hot Properties Rammer - Model 42116

Used to make standard clay bonded sand specimens for the High Temperature Compression Tester.

Digital Balance - Model 42118

Offers a sand laboratory the speed and accuracy required to perform all weighing applications.

Rapid Sand Washer - Model 42119

Used to prepare a sand sample for the AFS Clay Tester.

Mechanical Load Cell - Model 42125

Used to calibrate loads on several pieces of Simpson sand testing equipment.

Muffle Furnace - Model 42127

Used to calculate loss on ignition (LOI) and volatiles on both chemically and clay bonded foundry sands.

Drying Oven - Model 42129

Used to prepare clay bonded molding sands for testing dry sand properties.

Moisture Analyzer - Model 42130

Used to determine the moisture content of green sand and other raw materials used within the foundry.

AFS Clay Tester - Model 42131

Stirs a water and sand mixture into suspension and drains the overlaying liquid after a preset settling time.

Permeability Standard - Model 42132

Used to verify and calibrate the Digital Absolute Permmeter.

Acid Demand Value ADV Test Kit - Model 42136

Measures the amount of basic material present in the sand that is soluble in a dilute acid solution.

Analytical Balance - Model 42137

A high precision weighing instrument necessary for several standard AFS or DIN tests requiring high accuracy measurements.

Friability Tester - Model 42141

Used to determine the friability (surface integrity) of a clay bonded foundry molding sand by measuring the ability of compacted molding sand to resist abrasion or scuffing within the first few millimeters at the surface of a prepared mold.

Mold Hardness Tester B-Scale - Model 42142

Portable, lightweight and easy to operate. It incorporates an LCD display that clearly indicates the hardness number and completely eliminates any operator error associated with reading a mechanical scale. The instrument automatically records the maximum penetration value.

Mold Hardness Tester B-Scale Advanced - Model 42142ADV

Portable, lightweight and easy to operate. It incorporates an LCD display that clearly indicates the hardness number and completely eliminates any operator error associated with reading a mechanical scale. The instrument automatically records the maximum penetration value.

Mold Hardness Tester C-Scale- Model 42143

Portable, lightweight and easy to operate. It incorporates an LCD display that clearly indicates the hardness number and completely eliminates any operator error associated with reading a mechanical scale. The instrument automatically records the maximum penetration value.

Mold Hardness Tester C-Scale Advanced - Model 42143ADV

Portable, lightweight and easy to operate. It incorporates an LCD display that clearly indicates the hardness number and completely eliminates any operator error associated with reading a mechanical scale. The instrument automatically records the maximum penetration value.

Electronic Scratch Hardness Tester - Model 42145

The scratch hardness of a mold or core is determined using this instrument. The instrument incorporates a four-point cutter that penetrates a finished core or mold surface when rotated.

Desiccator-Accessories - Model 42147

Several different dissector options and accessories are available to control hygroscopic and other contamination during the cooling of samples after those samples have been heated in the Muffle Furnace.

Melt Point Tester - Model 42152

The test apparatus consists of a heated bar in which a temperature gradient is established so that the left end of the bar is cooler than the right.

Shatter Index Tester - Model 42159

This tester is designed to measure resistance to degeneration and plasticity of clay bonded sand upon impacting a target at a fixed velocity.

Digital Pneumatic Sand Squeezer - Model 42160

Designed to mimic the compressing action of an automatic molding machine in order to measure the effects the sand has upon its compaction abilities.

Pneumatic Ejector - Model PAB-P

Automatically ejects the specimen softly, ensuring high repeatability. Since the human “factor” can be eliminated, the test sample can be ejected without any further compaction.

Transverse Core Box-Gas Cured - Model PBC/3

For the production of 3 transverse strength samples of gas-cured sand to determine deformation.

Transverse Core Box-Heat Cured - Model PBH/3

Used for manual or mechanical ((Labjet (Model PLS)) preparation of standard bars (1–3 per operation).

Sand Container-Normal Flow - Model PBS/3C

For sand with normal and easy flowability

Sand Container-Easy Flow - Model PBS/3H

For sand with normal and easy flowability.

Core Transverse Accessory - Model PBV

Transverse strength of resin-bonded sand is the strength most frequently measured.

Motorized Universal Sand Strength Machine - Model PFG-MA

Electric motor instead of hand drive optional. Auxiliary instruments for determination of: Transverse-, shear-, splitting and increased strengths.

Gassing Head - Model PGC/3

Controls gassing of test samples of gas-cured molding sand.

Gas Pressure Measuring Device - Model PGD-E

Accurately measures the gas pressure from foundry sands.

Gassing Device - Model PGG

Controls gassing of test samples of gas-cured molding sand.

Scratch Hardness Tester - Model PKH

Used for determining core hardness and includes a calibration fixture, software package, and infrared receiver to download data to a PC.

Labjet - Model PLS

For the determination of the transverse strength of core sand, a standard sample specimen of reproducible quality must be made.

Methylene Blue Clay Tester-Mag Stirrer - Model 223100 / 42136-IS

The Methylene Blue Clay Tester is used to determine the amount of live bentonite clay present in a sand sample.

Twin-Transverse Shear Strength Accessory - Model PQS

Measures the accuracy of the twin-transverse shear strength.

Splitting Strength Accessory - Model PSP

Determines the splitting strength by simplified and approximate measuring, or green tensile strength (splitting strength x 0,637 = green tensile strength) of up to 15 N/cm2.

Temperature Controller - Model PTR-D

For regulation of temperature and time when preparing transverse strength bars.

Cold Tensile Strength Accessory - Model PZV

Mounted to the Universal Sand Strength Machine (Model PFG) to measure the cold tensile strength of standard dog bone specimens prepared from cold box, core oil, hotbox/warmbox and nobake/air-set sands.

Sand Testing Equipment

Please fill out this form to request a quote.