Cold Box Sand Laboratory

Determines the strength properties of clay and/or chemically bonded foundry sand specimens.

This accessory is mounted on the Electronic Universal Sand Strength Machine.

Attaches to the Electronic Universal Sand Strength Machine and holds the standard core sand transverse sand specimens for transverse strength testing.

Used to determine the fineness of foundry sands.

Used with the Laboratory Sifter.

Used to prepare a representative sample of unbonded foundry sands for sieve analysis testing.

Used to prepare a representative sample of unbonded foundry sands for sieve analysis testing.

Used to make standard tensile, transverse (except cold box) and hot distortion test pieces.

Connects to the Test Piece Blower or the Modified Test Piece Blower in order to control the gassing and purging sequence of the test specimen via the included electronic cables and supply lines.

Attaches to the tooling of the Test Piece Blower and Modified Test Piece Blower in order to produce cold box (gas curred) test specimens.

Offers a sand laboratory the speed and accuracy required to perform all weighing applications.

Used to calculate loss on ignition (LOI) and volatiles on both chemically and clay bonded foundry sands.

Used to determine the moisture content of green sand and other raw materials used within the foundry.

Measures the amount of basic material present in the sand that is soluble in a dilute acid solution.

Designed for chemically bonded sands, the scratch hardness of a mold or core is determined using this instrument. The instrument incorporates a four-point cutter that penetrates a finished core or mold surface when rotated.

Accurately measures the gas pressure from foundry sands.