English
SPECIFICATIONS
- Part Number:
- Internal Calibration:
- Length:
- Width:
- Height:
- Weight:
The Mechanical Load Cell is used to calibrate loads on the following Simpson laboratory equipment: the Electronic Universal Sand Strength Machine, Model No. 42104, the View Full Description
The Mechanical Load Cell is used to calibrate loads on the following Simpson laboratory equipment: the Electronic Universal Sand Strength Machine, Model No. 42104, the Digital Pneumatic Sand Squeezer, Model No. 42160 and the High Temperature Compression Tester, Model No. 42115.
The gauge is calibrated using NIST certified dead weights at three positions. Each mechanical load cell is supplied with certification documentation. Using this mechanical load cell, the Electronic Universal Sand Strength Machine, Model No. 42104, can be calibrated in minutes. The incorporation of digital calibration allows the operator to make all necessary corrections via the keyboard without disassembling the strength machine.
The Mechanical Load Cell is supplied with the required fixtures for proper mounting on the Electronic Universal Sand Strength Machine, Model No. 42104. Please note that additional fixtures, Part No. 0017-721, are required for mounting the Mechanical Load Cell when used to calibrate the Digital Pneumatic Sand Squeezer, Model No. 42160. The High Temperature Compression Tester, Model No. 42115 also requires additional fixtures for alignment of the Mechanical Load Cell.
| AFS: | Part No. 0042125 |
|---|---|
| Metric: | Part No. 0042125 |
| Process: |
Chemically Bonded Sand Clay Bonded Sand Cold Box Core Oil Hotbox/Warmbox Shell/Croning |
|---|
The Mechanical Load Cell is used to calibrate loads on the following Simpson laboratory equipment: the Electronic Universal Sand Strength Machine, Model No. 42104, the Digital Pneumatic Sand Squeezer, Model No. 42160 and the High Temperature Compression Tester, Model No. 42115.
The gauge is calibrated using NIST certified dead weights at three positions. Each mechanical load cell is supplied with certification documentation. Using this mechanical load cell, the Electronic Universal Sand Strength Machine, Model No. 42104, can be calibrated in minutes. The incorporation of digital calibration allows the operator to make all necessary corrections via the keyboard without disassembling the strength machine.
The Mechanical Load Cell is supplied with the required fixtures for proper mounting on the Electronic Universal Sand Strength Machine, Model No. 42104. Please note that additional fixtures, Part No. 0017-721, are required for mounting the Mechanical Load Cell when used to calibrate the Digital Pneumatic Sand Squeezer, Model No. 42160. The High Temperature Compression Tester, Model No. 42115 also requires additional fixtures for alignment of the Mechanical Load Cell.
| AFS: | Part No. 0042125 |
|---|---|
| Metric: | Part No. 0042125 |
| Process: |
|---|
(https://www.simpsongroup.com/model/42104)
(https://www.simpsongroup.com/model/42160)
(https://www.simpsongroup.com/model/42115)
We use cookies and other tracking technologies to personalize content and analyze our site traffic. More information about this is in our Privacy Policy. You can control third party cookies by adjusting your browser settings. Privacy Policy
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.