0 Item in list
View
Get a personalized quote on selected items or email the list to a colleague or just to yourself for later viewing.
OK
Print Page
Model 42111
Laboratory Core Sand Mixer

The Laboratory Core Sand Mixer is designed to mix liquid binders with sand that is common to all chemically bonded sand mixtures. The mixer features an “S” shaped mixing blade with a vertical s... View Full Description

Items can be emailed to you or submitted for a personalized quote.
FULL DESCRIPTION

The Laboratory Core Sand Mixer is designed to mix liquid binders with sand that is common to all chemically bonded sand mixtures. The mixer features an “S” shaped mixing blade with a vertical shaft that completely mixes the complete sand mass.

The mixer has a mixing capacity of approximately 4 kg. (9 lbs.) or 3.7 liters (0.13 cu.ft.) of silica sand or similar chemicals and operates with a 0.559kw (0.75 HP) motor.

FULL DESCRIPTION
AFS:Part No. 0042111-ASM
Part No. 0042111-2-ASM
 
Metric:Part No. 0042111-ASM
Part No. 0042111-2-ASM
SAND CASTING PROCESS
Process: Cold Box
Core Oil
Hotbox/Warmbox
Nobake/Air-set
Shell/Croning
SPECIFICATIONS
  • Part Number:
  • Power Requirements:
  • Length:
  • Width:
  • Height:
  • Weight:
 
  • Part Number
    0042111-ASM
  • Power Requirements:
    120 Volts, 60 Hz
  • Length:
    20.5" / 521mm
  • Width:
    10.75" / 273mm
  • Height:
    12.75" / 324mm
  • Weight:
    110lb / 50kg
 
  • Part Number
    0042111-2-ASM
  • Power Requirements:
    230 Volts, 50 Hz
  • Length:
    20.5" / 521mm
  • Width:
    10.75" / 273mm
  • Height:
    12.75" / 324mm
  • Weight:
    110lb / 50kg
Model 42111
Laboratory Core Sand Mixer

The Laboratory Core Sand Mixer is designed to mix liquid binders with sand that is common to all chemically bonded sand mixtures. The mixer features an “S” shaped mixing blade with a vertical shaft that completely mixes the complete sand mass.

The mixer has a mixing capacity of approximately 4 kg. (9 lbs.) or 3.7 liters (0.13 cu.ft.) of silica sand or similar chemicals and operates with a 0.559kw (0.75 HP) motor.

TESTING STANDARDS
AFS:Part No. 0042111-ASM
Part No. 0042111-2-ASM
 
Metric:Part No. 0042111-ASM
Part No. 0042111-2-ASM
SAND CASTING PROCESS
Process: Cold Box
Core Oil
Hotbox/Warmbox
Nobake/Air-set
Shell/Croning

Specifications

  • Part Number
    0042111-ASM
  • Power Requirements:
    120 Volts, 60 Hz
  • Length:
    20.5" / 521mm
  • Width:
    10.75" / 273mm
  • Height:
    12.75" / 324mm
  • Weight:
    110lb / 50kg
  • Part Number
    0042111-2-ASM
  • Power Requirements:
    230 Volts, 50 Hz
  • Length:
    20.5" / 521mm
  • Width:
    10.75" / 273mm
  • Height:
    12.75" / 324mm
  • Weight:
    110lb / 50kg

We use cookies and other tracking technologies to personalize content and analyze our site traffic. More information about this is in our Privacy Policy. You can control third party cookies by adjusting your browser settings. Privacy Policy

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close