English
SPECIFICATIONS
- Part Number:
- Length:
- Width:
- Height:
- Weight:
The Sand Rammer is used to prepare a standard AFS 2 in. x 2 in. (Metric 50 mm x 50 mm) cylindrical sand specimen for compression, shear, splitting, deformation and tensile tests. In the ceramics ... View Full Description
The Sand Rammer is used to prepare a standard AFS 2 in. x 2 in. (Metric 50 mm x 50 mm) cylindrical sand specimen for compression, shear, splitting, deformation and tensile tests. In the ceramics industry, the Sand Rammer can also be used to determine the compactability of standard molding sands.
Through preparation and compactability foundry sands fully develop their important mechanical-physical properties for measuring characteristics of a sand test specimen. Reliability and reproducibility of the values measured depend completely on the manner of its preparation.
The sand to be tested is taken from the molding line and placed into the specimen tube. A well-defined ramming energy is applied to compact the sand filling of the specimen tube into a test sample. Two measurement scales are provided on the stem of the Sand Rammer. One scale is for measuring compactability and another for measuring the final specimen height. The scales can also be used to determine the proper sample weight required for preparation of a standard sand specimen.
Components Included: Stripping Post, Specimen Tube and Tube Pedestal
Devices Required: Tube Filler Accessory (Model 42100A)
| AFS: | Part No. 0042100 |
|---|---|
| Metric: | Part No. 0042100-M |
| ASTM C181: | Part No. 0042100-W |
| Process: |
Clay Bonded Sand Core Oil Nobake/Air-set |
|---|
The Sand Rammer is used to prepare a standard AFS 2 in. x 2 in. (Metric 50 mm x 50 mm) cylindrical sand specimen for compression, shear, splitting, deformation and tensile tests. In the ceramics industry, the Sand Rammer can also be used to determine the compactability of standard molding sands.
Through preparation and compactability foundry sands fully develop their important mechanical-physical properties for measuring characteristics of a sand test specimen. Reliability and reproducibility of the values measured depend completely on the manner of its preparation.
The sand to be tested is taken from the molding line and placed into the specimen tube. A well-defined ramming energy is applied to compact the sand filling of the specimen tube into a test sample. Two measurement scales are provided on the stem of the Sand Rammer. One scale is for measuring compactability and another for measuring the final specimen height. The scales can also be used to determine the proper sample weight required for preparation of a standard sand specimen.
Components Included: Stripping Post, Specimen Tube and Tube Pedestal
Devices Required: Tube Filler Accessory (Model 42100A)
| AFS: | Part No. 0042100 |
|---|---|
| Metric: | Part No. 0042100-M |
| ASTM C181: | Part No. 0042100-W |
| Process: |
Clay Bonded Sand Core Oil Nobake/Air-set |
|---|
(https://www.simpsongroup.com/model/42100a)
(https://www.simpsongroup.com/model/42100c)
(https://www.simpsongroup.com/model/42100d)
(https://www.simpsongroup.com/model/42100e)
(https://www.simpsongroup.com/model/42100f)
(https://www.simpsongroup.com/model/42100g)
We use cookies and other tracking technologies to personalize content and analyze our site traffic. More information about this is in our Privacy Policy. You can control third party cookies by adjusting your browser settings. Privacy Policy
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.