Mechanical Load Cell

Model 42125

Mechanical Load Cell

Part numbers

AFS: #0042125
Metric: #0042125

Sand casting process

  • Chemically Bonded Sand
  • Clay Bonded Sand
  • Cold Box
  • Core Oil
  • Hotbox/Warmbox
  • Shell/Croning

Specifications

Internal Calibration: n/a
Length: 7.5" / 191mm
Width: 4" / 102mm
Height: 1" / 25mm
Weight: 2.2lb / 1kg

The Mechanical Load Cell is used to calibrate loads on the following Simpson sand testing equipment: the Electronic Universal Sand Strength Machine, Model No. 42104, the Digital Pneumatic Sand Squeezer, Model No. 42160 and the High Temperature Compression Tester, Model No. 42115.

The gauge is calibrated using NIST certified dead weights at three positions. Each mechanical load cell is supplied with certification documentation. Using this mechanical load cell, the Electronic Universal Sand Strength Machine, Model No. 42104, can be calibrated in minutes. The incorporation of digital calibration allows the operator to make all necessary corrections via the keyboard without disassembling the strength machine.

The Mechanical Load Cell is supplied with the required fixtures for proper mounting on the Electronic Universal Sand Strength Machine, Model No. 42104. Please note that additional fixtures, Part No. 0017-721, are required for mounting the Mechanical Load Cell when used to calibrate the Digital Pneumatic Sand Squeezer, Model No. 42160. The High Temperature Compression Tester, Model No. 42115 also requires additional fixtures for alignment of the Mechanical Load Cell.

Need More Information?

Contact Simpson to learn more about our innovative solutions and how we can support your operation. We are here to help if you have any questions or need assistance.

Need More Information

Related Content

Electronic Universal Sand Strength Machine - Model 42104 image

Electronic Universal Sand Strength Machine - Model 42104

Determines the strength properties of clay and/or chemically bonded foundry sand specimens.

Digital Absolute Permmeter - Model 42105 image

Digital Absolute Permmeter - Model 42105

A fully automatic system which measures the permeability of porous sand masses, both in compacted and loose states.

Wet Tensile Tester - Model 42112 image

Wet Tensile Tester - Model 42112

Determines tensile strength of the condensation zone that is created in all clay bonded molds during and after pouring.

Laboratory Sifter - Model 42106 image

Laboratory Sifter - Model 42106

Used to determine the fineness of foundry sands.