Splitting Strength Accessory

Model 42104D

Splitting Strength | Simpson

Part numbers

AFS: #0042104D
Metric: #0042104D

Sand casting process

Clay Bonded Sand

Specifications

Length: 2.5" / 64mm
Width: 2.5" / 64mm
Height: 2" / 51mm
Weight: 1lb / 0.5kg

To determine the splitting strength of clay bonded molding sands in green or dry conditions, two specially designed circular clamps are attached to the Electronic Universal Sand Strength Machine (Model 42104).

This test is considered an indirect measurement of molding sand’s tensile strength properties.

In this test a standard cylindrical sand specimen is squeezed between two specially designed compression clamps. As these clamps squeeze the sand specimen, a split is formed that runs parallel to the axis of the specimen. The values of splitting strength tests have been found to have very low dispersion. The splitting test is easy to execute, and the test utilizes the same type of sand specimen used in the standard green compression test. It has been found that there is a close correlation between splitting strength and tensile strength in clay bonded molding sand. Since the tensile strength test is difficult and delicate, it is preferable to determine tensile strength as a function of splitting strength.

Utilized With: Electronic Universal Sand Strength Machine (Model 42104)

Need More Information?

Contact Simpson to learn more about our innovative solutions and how we can support your operation. We are here to help if you have any questions or need assistance.

Splitting Strength Accessory

Related Content

42104 | Simpson

Electronic Universal Sand Strength Machine - Model 42104

Determines the strength properties of clay and/or chemically bonded foundry sand specimens.

42104C | Simpson

Cold Tensile Strength Accessory - Model 42104C

This accessory is mounted on the Electronic Universal Sand Strength Machine.

4210E | Simpson

Green Deformation Accessory - Model 42104E

Measures the deformation of the green sand specimen after a compression test on the Electronic Universal Sand Strength Machine.

42104F | Simpson

Hot Shell Tensile Accessory - Model 42104F

This accessory to the Electronic Universal Sand Strength Machine is used to measure the hot tensile strength of shell sands.