Electronic Universal Sand Strength Machine - Model 42104
Determines the strength properties of clay and/or chemically bonded foundry sand specimens.
Cold Tensile Strength Accessory - Model 42104C
This accessory is mounted on the Electronic Universal Sand Strength Machine.
Core Transverse Strength Accessory - Model 42104K
Attaches to the Electronic Universal Sand Strength Machine and holds the standard core sand transverse sand specimens for transverse strength testing.
Laboratory Sifter - Model 42106
Used to determine the fineness of foundry sands.
Sand Testing Sieves - Model 42106A
Used with the Laboratory Sifter.
Test Pieces Blower - Model 42109
Used to make standard tensile, transverse (except cold box) and hot distortion test pieces.
Catalyst Vaporizer - Model 42109A
Connects to the Test Piece Blower or the Modified Test Piece Blower in order to control the gassing and purging sequence of the test specimen via the included electronic cables and supply lines.
Cold Box Gassing Purging Device - Model 42109B
Attaches to the tooling of the Test Piece Blower and Modified Test Piece Blower in order to produce cold box (gas curred) test specimens.
Electronic Scratch Hardness Tester - Model 42145
Designed for chemically bonded sands, the scratch hardness of a mold or core is determined using this instrument. The instrument incorporates a four-point cutter that penetrates a finished core or mold surface when rotated.
Gas Pressure Measuring Device - Model PGD-E
Accurately measures the gas pressure from foundry sands.
