Model 42103
Tensile Core Box Accessory (9 Cavity)
The Tensile Core Box is used to make standard specimens for tensile strength testing using self-curing (air set) sands. This core box molds nine dog bone sand samples simultaneously. It consists of…
Model 42103A
Transverse Core Box Accessory (9 Cavity)
The Transverse Core Box Accessory is used to make standard specimens for transverse strength testing using self-curing (air-set) sands. Three, 3-cavity core boxes are inside the hard wood frame w…
Model 42104
Electronic Universal Sand Strength Machine
The Electronic Universal Sand Strength Machine determines the strength properties of clay and/or chemically bonded foundry sand specimens. This strength machine applies pressure on a sand specimen …
Model 42104C
Cold Tensile Strength Accessory
This accessory is mounted on the Electronic Universal Sand Strength Machine, Model No. 42104. The test determines the cold tensile strength of standard dog bone specimens prepared from oil, cold bo…
Model 42104K
Core Transverse Strength Accessory
This accessory attaches to the Electronic Universal Sand Strength Machine, Model No. 42104, and holds the standard core sand transverse sand specimens for transverse strength testing.
Model 42106
Laboratory Sifter
The Laboratory Sifter is used to determine the fineness of foundry sands. The sifter is designed to hold up to 11 standard half-height, 8-inch or 200mm diameter sieves. The Sand Testing Sieves, Mod…
Model 42106A
Sand Testing Sieves
The Sand Testing Sieves are used with the Laboratory Sifter, Model No. 42106 for determining the AFS grain fineness number and for the distribution of molding and core sands. Included are a nest of…
Model 42106B
1/8″ Microsplitter
The 1/8” Microsplitter is used to prepare a representative sample of unbonded foundry sands for sieve analysis testing. Sixteen 1/8” chutes obtain representative sand samples of 125 grams or sm…
Model 42106D
1/2″ Riffle Splitter
The ½” Riffle Splitter accessory is used to prepare a representative sample of unbonded foundry sands for sieve analysis testing,
Fourteen 1/2” chutes divide the sand accurately in half…
Model 42118
Digital Balance
The Digital Balances, Models 42118, offer a sand laboratory the speed and accuracy required to perform all weighing applications. All balances feature solid construction, a high contrast display an…
Model 42127
Muffle Furnace
The Muffle Furnace is used to calculate loss on ignition (LOI) and volatiles on both chemically and clay bonded foundry sands. This calculation allows foundries to monitor and control organic add…
Model 42130
Moisture Analyzer
The Moisture Analyzer is used to determine the moisture content of green sand and other raw materials used within the foundry. Depending upon the unit, at least 25g up to 90g of sand are placed on …
Model 42145
Electronic Scratch Hardness Tester
The scratch hardness of a mold or core is determined using this instrument. The instrument incorporates a four point cutter that penetrates a finished core or mold surface when rotated. The depth o…
Model PEP
Mold Strength Tester
For the determination of the degree of curing in the lower zones and determination of curing time, especially the strip time
Model PGD-E
Gas Pressure Measuring Device
In order to accurately measure the gas pressure from foundry sands, this instrument can be used. To measure, a sand sample is heated then the gas pressure is recorded over time.
The succes…
German
English