0 Item in list
Get a personalized quote on selected items or email the list to a colleague or just to yourself for later viewing.

Hotbox/Warmbox Sand Laboratory

Model 42104
Electronic Universal Sand Strength Machine

The Electronic Universal Sand Strength Machine determines the strength properties of clay and/or chemically bonded foundry sand specimens. This strength machine applies pressure on a sand specimen …

Items can be emailed to you or submitted for a personalized quote.
Model 42104C
Cold Tensile Strength Accessory

This accessory is mounted on the Electronic Universal Sand Strength Machine, Model No. 42104. The test determines the cold tensile strength of standard dog bone specimens prepared from oil, cold bo…

Model 42104K
Core Transverse Strength Accessory

This accessory attaches to the Electronic Universal Sand Strength Machine, Model No. 42104, and holds the standard core sand transverse sand specimens for transverse strength testing.

Model 42106
Laboratory Sifter

The Laboratory Sifter is used to determine the fineness of foundry sands. The sifter is designed to hold up to 11 standard half-height, 8-inch or 200mm diameter sieves. The Sand Testing Sieves, Mod…

Model 42106A
Sand Testing Sieves

The Sand Testing Sieves are used with the Laboratory Sifter, Model No. 42106 for determining the AFS grain fineness number and for the distribution of molding and core sands. Included are a nest of…

Model 42106B
1/8″ Microsplitter

The 1/8” Microsplitter is used to prepare a representative sample of unbonded foundry sands for sieve analysis testing. Sixteen 1/8” chutes obtain representative sand samples of 125 grams or sm…

Model 42106D
1/2″ Riffle Splitter

The ½” Riffle Splitter accessory is used to prepare a representative sample of unbonded foundry sands for sieve analysis testing,

Fourteen 1/2” chutes divide the sand accurately in half…

Model 42109
Test Pieces Blower

The Test Pieces Blower is used to make standard tensile, transverse (except cold box) and hot distortion test pieces.

Considering that blowing is the most widely used compacting method for c…

Model 42118
Digital Balance

The Digital Balances, Models 42118, offer a sand laboratory the speed and accuracy required to perform all weighing applications. All balances feature solid construction, a high contrast display an…

Model 42127
Muffle Furnace

The Muffle Furnace is used to calculate loss on ignition (LOI) and volatiles on both chemically and clay bonded foundry sands.  This calculation allows foundries to monitor and control organic add…

Model 42130
Moisture Analyzer

The Moisture Analyzer is used to determine the moisture content of green sand and other raw materials used within the foundry. Depending upon the unit, at least 25g up to 90g of sand are placed on …

Model 42145
Electronic Scratch Hardness Tester

The scratch hardness of a mold or core is determined using this instrument. The instrument incorporates a four point cutter that penetrates a finished core or mold surface when rotated. The depth o…

Model PGD-E
Gas Pressure Measuring Device

In order to accurately measure the gas pressure from foundry sands, this instrument can be used.  To measure, a sand sample is heated then the gas pressure is recorded over time.

The succes…

We use cookies and other tracking technologies to personalize content and analyze our site traffic. More information about this is in our Privacy Policy. You can control third party cookies by adjusting your browser settings. Privacy Policy

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.