Model 42104
Electronic Universal Sand Strength Machine
The Electronic Universal Sand Strength Machine determines the strength properties of clay and/or chemically bonded foundry sand specimens. This strength machine applies pressure on a sand specimen …
Model 42104C
Cold Tensile Strength Accessory
This accessory is mounted on the Electronic Universal Sand Strength Machine, Model No. 42104. The test determines the cold tensile strength of standard dog bone specimens prepared from oil, cold bo…
Model 42104K
Core Transverse Strength Accessory
This accessory attaches to the Electronic Universal Sand Strength Machine, Model No. 42104, and holds the standard core sand transverse sand specimens for transverse strength testing.
Model 42106
Laboratory Sifter
The Laboratory Sifter is used to determine the fineness of foundry sands. The sifter is designed to hold up to 11 standard half-height, 8-inch or 200mm diameter sieves. The Sand Testing Sieves, Mod…
Model 42106A
Sand Testing Sieves
The Sand Testing Sieves are used with the Laboratory Sifter, Model No. 42106 for determining the AFS grain fineness number and for the distribution of molding and core sands. Included are a nest of…
Model 42106B
1/8″ Microsplitter
The 1/8” Microsplitter is used to prepare a representative sample of unbonded foundry sands for sieve analysis testing. Sixteen 1/8” chutes obtain representative sand samples of 125 grams or sm…
Model 42106D
1/2″ Riffle Splitter
The ½” Riffle Splitter accessory is used to prepare a representative sample of unbonded foundry sands for sieve analysis testing,
Fourteen 1/2” chutes divide the sand accurately in half…
Model 42109
Test Pieces Blower
The Test Pieces Blower is used to make standard tensile, transverse (except cold box) and hot distortion test pieces.
Considering that blowing is the most widely used compacting method for c…
Model 42109A
Catalyst Vaporizer
The Catalst Vaporizer connects to the Test Piece Blower, Model 42109, or the Modified Test Piece Blower, Model 42109MOD, in order to control the gassing and purging sequence of the test specimen vi…
Model 42109B
Cold Box Gassing/Purging Device
The Cold Box Gassing/Purging Device attaches to the tooling of the Test Piece Blower, Model 42109, and Modified Test Piece Blower, Model 42109MOD, in order to produce cold box (gas curred) test spe…
Model 42118
Digital Balance
The Digital Balances, Models 42118, offer a sand laboratory the speed and accuracy required to perform all weighing applications. All balances feature solid construction, a high contrast display an…
Model 42127
Muffle Furnace
The Muffle Furnace is used to calculate loss on ignition (LOI) and volatiles on both chemically and clay bonded foundry sands. This calculation allows foundries to monitor and control organic add…
Model 42130
Moisture Analyzer
The Moisture Analyzer is used to determine the moisture content of green sand and other raw materials used within the foundry. Depending upon the unit, at least 25g up to 90g of sand are placed on …
Model 42136
Acid Demand Value (ADV) Test Kit
The Acid Demand Value (ADV) Test measures the amount of basic material present in the sand that is soluble in a dilute acid solution. Since the reaction which cures the resin in many chemical binde…
Model 42145
Electronic Scratch Hardness Tester
The scratch hardness of a mold or core is determined using this instrument. The instrument incorporates a four point cutter that penetrates a finished core or mold surface when rotated. The depth o…
Model PGD-E
Gas Pressure Measuring Device
In order to accurately measure the gas pressure from foundry sands, this instrument can be used. To measure, a sand sample is heated then the gas pressure is recorded over time.
The succes…
German
English