 |
|
|
|
|
|
|
|
|
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
|
|||||||
 |
|
|||||||
 |
|
|||||||
 |
 |
 |
 |
 |
 |
|
||
 |
|
|||||||
 |
 |
|
Sand Preparation:
| "Comparative Advantages
of a Simpson Multi-Mull® Versus Batch Mullers in Medium to Large Capacity Sand Systems" |
 |
|
|
|
| "Controlling Hot Sand to
Ensure Mold, Casting Quality", Modern Casting, February 2001 by Scott M. Strobl, Vice President of Technology, Simpson Technologies and David V. Silsby, Product Manager-- Green Sand Preparation, Simpson Technologies |
|
|
|
|
|
"Experiences with VFD's and Simpson
Batch Mix-Mullers", by Scott M. Strobl, Vice President of Technology |
|
|
|
|
| "Fundamentals of Green
Sand Preparation and Control", by Scott M. Strobl, Vice President of Technology, Simpson Technologies |
|
|
|
|
| "Fundamentos en la
Preparacion y Control de la Arena Verde", Modern Casting, Fundi Expo 2000 by Scott M. Strobl, Vice President of Technology, Simpson Technologies |
|
|
|
|
| "Guide to Solving Hot Sand Problems" |
|
|
|
|
| "How to Improve Green
Sands Through More Effective Mulling", Modern Casting, February 1995 by Scott M. Strobl, Vice President of Technology, Simpson Technologies |
|
|
|
|
| *"A Mulling Index Applied to Sand-Water-Bentonite" | |
|
|
|
| *"Reduction in Sand-Related Scrap Through Effective Sand Cooling" | |
|
|
|
| *"Preparation of Molding Sand via Mulling" |
|
|
|
|
| *"Technique
of Mulling--Muller Modifications" by E. C. Troy, Vice President and Research Director (Retired), National Engineering Company |
|
*Indicates a Simpson Classic publication.
Sand Reclamation:
| "An Investigation of
the Causes that Lead to Burn-in/Burn-on in Heavy Section Steel
Castings", by B.L. Kruse, V.L. Richards and P.D. Jackson, University of Missouri-Rolla, Rolla, Missouri |
|
|
|
|
| "Sand Reclamation" |
|
|
|
|
| "Sand Reclamation
Economics for Small Foundries" by David O. Kennedy, PE, Simpson Technologies Corporation |
|
|
|
|
| "Thermal-Pneumatic
Reclamation of Molding Sand for Reuse in Core Work", by M. J. Granlund and David V. Silsby, Product Manager--Green Sand Preparation, Simpson Technologies |
|
Sand Testing:
| "Adapting Hot
Distortion Curves to Process Control", Foundry Management & Technology Magazine, March 1998 by Scott McIntyre, Metallurgist, Grede Foundries Inc.--Vassar Foundry and Scott M. Strobl, Vice President of Technology, Simpson Technologies |
|
|
|
|
| "Controlling Green
Sand Carbons", Modern Casting, June 1994 by Scott M. Strobl, Vice President of Technology, Simpson Technologies |
|
|
|
|
| "Gauging Green Sand
Flowability Helps Predict Mold Quality", Modern Casting, February 1997 by Scott M. Strobl, Vice President of Technology, Simpson Technologies and Fred Schuster, Lab Manager, Simpson Technologies |
|
|
|
|
| "Simpson®+Gerosa
Electronic Mold Hardness Tester", Editorial in CMT by Scott M. Strobl, Vice President of Technology, Simpson Technologies |
|
|
|
|
| "Improving Sand Control with Wet
Tensile Testing", by Scott M. Strobl, Vice President of Technology, Simpson Technologies |
|
|
|
|
| "Using
Stress-Strain Curves to Evaluate and Control Clay Bonded Molding
Sands", 4th Asian Foundry Congress Transactions, October 1996 by Scott M. Strobl, Vice President of Technology, Simpson Technologies and Fred Schuster, Laboratory Manager, Simpson Technologies |
|
| "Hydraulics Improve Molding
Machine Productivity", Foundry Management and Technology, December 2003 |
|
Process Mixing:
| "How to Choose the Best Mixer for Your Wetted Solids Application" |
|
|
|
|
| "Muller Mixing of
Bentonite and Iron Ore Concentrate at Cornwall", by R. L. Stone, J. M. Karpinski, and F. P. White |
|
|
|
|
| "The Simpson Mix-Muller in the Pyrotechnic Manufacturing Industry" |
|
Copyright © 2001-2008 Simpson Technologies Corporation.